1/2
Sol Expert 90200 Micro gearmotor Assembly kit 1:19 12000 U/min (max)
EAN:
Part number:
Item no:
Quantity (Piece(s))
Savings
Package size (plus VAT.)
1
-
€ 15.12
3
4% = € 0.67
€ 14.45
Volume discounts vary depending on the seller
You save € 0.00
Number
Total (€ 15.12 / piece)
€ 15.12
plus VAT.
Highlights & Details
Micro worm gear kit
- Model Car Tuning
Technical specifications
- Motor: 17 x 7 mm (without axle), 5polig, speed of 12000rpm(U/m) @3 volts
- Worm: Steel, diameter 2.8 mm, length 5.5 mm
- Axle: Steel, 24 x 1 mm
- Gear: Module M0.2, height 2 mm, material brass
- 1x 19 teeth Diameter: 3.8, Translations: 1:19, Speed: Fast
- 1x 26 teeth diameter: 5.2 mm, ratios: 1:26, speed: medium
- 1x 35 teeth diameter: 7.0 mm, ratios: 1:35, speed: Slow
- Size
Universal
- Axle length
24 mm
- Features
Assembly kit
- Gear reduction
1:19
- Axle Ø
1 mm
- Material
Steel
- Rotational speed (max.)
12000 U/min
- Rotational speed range
12000 U/min (max)
- Voltage (min.)
0.3 V
- Voltage (max.)
4.8 V
- Age category
15 years and over
- Product type
Micro gearmotor
Documents & Downloads
User & Safety Instructions
User & Safety Instructions 2471391 Sol Expert 90200 Micro gearmotor Assembly kit 1:19 12000 U/min (max)
Description
Micro worm gear kit - for the smallest applications in the smallest models of all kinds!
This set can be used to motorized a wide range of model drives and unusual special functions in a confined space. Due to the module of the gears in the size M0.2, the individual gears are extremely small and thus enable excellent motion functions, even in micro models.
In addition to the 5poligen and for its size, the set contains surprisingly powerful micro motor, a steel screw, a steel shaft (24 x 1mm) and 3 brass gears with different number of teeth. Depending on the speed and power requirement, the suitable gear can be installed individually. The speed can be regulated with the height of the input voltage. The control by a drive controller is possible at any time.
This text is machine translated.
This set can be used to motorized a wide range of model drives and unusual special functions in a confined space. Due to the module of the gears in the size M0.2, the individual gears are extremely small and thus enable excellent motion functions, even in micro models.
In addition to the 5poligen and for its size, the set contains surprisingly powerful micro motor, a steel screw, a steel shaft (24 x 1mm) and 3 brass gears with different number of teeth. Depending on the speed and power requirement, the suitable gear can be installed individually. The speed can be regulated with the height of the input voltage. The control by a drive controller is possible at any time.
This text is machine translated.