TP-LINK TL-SG1008P TL-SG1008P Network switch 8 ports 1 GBit/s PoE

The 8-Port Gigabit Desktop-Po E-SWITCH TL-SG1008 P enables seamless network connection. It combines fast Ethernet with Gigabit Ethernet network capabilities.

As this product works
4 of the 8 Auto-tuning-RJ45 ports (ports 1 to 4) of the switch support Power over Ethernet (PoE). This PoE Ports can PoE devices automatically recognize and IEEE 802.3af powered devices (PDs). In this situation, the electrical power together with the data in a single cable. The device makes it possible to expand your network there, where there is no electricity cables or sockets, and where devices, such as access points, IP cameras or IP phones, etc. want to operate.

Behavior in case of overload
The TL-SG1008 P has a priority * function, which helps to protect the system when the system performance overstrained. If the entire current consumption of the PoE-PDs is greater than or equal to 53 W, among the priorities assigned to PoE ports. The system will then decide on the power distribution and is the energy supply on port with the lowest priority switch-off.

Port Priority Function
Priority: This function is there to protect the system when the PoE power overstrained. For example, if the ports 1, 2 and 4 respectively 15.4 W (maximum power per port 15.4 W), the total capacity is 46.2 W (the PoE-Max-LED is red). When an additional PD with 10 W on Port 3 is connected, the system is switched off to avoid damage to the device port 4. This means that on port 1 and 2 respectively 15.4 W and 10 W can be used up to port 3. On Port 4 is not released.

Easy to use
The TL-SG1008 P is easy to install and use. It does not require any configuration. With the desktop design, the outstanding performance and the quality is TP-Link 8 Port Gigabit Desktop-Po E-SWITCH TL-SG1008 P a great choice for expansion of your home or office network.

This text is machine translated.